Manual ink cup pad printer + Polymer plates making package Business start kits

Manual Sealed inkcup pad printing printer + plate making kits package. Manual pad printing printer package. Manual inkcup pad printer, 1 piece. UV Exposure machine (Plate maker), 1 piece. Cliche Making Polymer Plates, 2 pcs. A4 size Transparent films, 5 pcs (for injet printer or laser priter uses).

And was put in warehouse for three years, and. Look dirty, and one part is broken.

But we check it, this is good condition , and the printer is manual, there is no any electric parts, so you can use it for a life time. S biggest advantages are the ability to print on irregular surfaces, such as golf balls, lighters, pens, bottles, toys, etc, on small areas image printing.

It can also print on flat surfaces. Is a printing process that can transfer a 2-D image onto a 3-D object. This is accomplished using an indirect offset printing process that involves an image being transferred from the printing plate (cliché) via a silicone pad onto a substrate (surface to be printed). Pad printing is used for printing on otherwise impossible products in many industries including medical, automotive, promotional, apparel, electronics, appliances, sports equipment and toys. Advantages of Photopolymer Plates making. Good for the environment , no need chemicals. Make clich making process easier to operate. This package uses: Photopolymer Plates. The plate material is UV photosensitive and when exposed to an ultraviolet light through a high contrast negative, the U. Cross links the polymers and hardens the image. The unexposed portion of the negative is washed off in plain water, dried and post exposed.

The plate is ready for the press in less than thirty minutes. 1:Pad Printer (sealed ink cup), ONE Unit. Free two pads (one square and one round). 2: UV Exposure plate maker, ONE Unit. User-friendly desktop design with long-term life span.

Exposing area: 10.23"x8.26"(260x210mm) Voltage: 110v/220v Light power: 48W (8W x 6 tubes) Time Range: 0-5.5 mins Machine size:11.82"x11.8"x29.5(30x29x75cm) Net weight: 12Lb(5kg). 3: Cliche making Polymer plates: 2 sheets.

Size: 100mm x 100 mm. Providing a good do-it-yourself option. These are typically used in short to medium production runs. Water washable No solvent used! High durability, Allows printing very fine lines and big solid lines together, by using 300 lpi screen available.

4:Transparent films: 5 SHEETS. (for ink-jet printer or laser priter uses). Any Epson/HP/Canon ink-jets printers can use it. This Film is a specially coated, clear film that absorbs quick drying inkjet ink, and controls the shape of fine lines and half tones, can be used to make stencil in screen printng, hot stamping and pad printing. Print on the coated (matte) side of the film!

For the unique high-tech solution, they can not be conglutinated with each other when folded together. The image is well-resisting and suitable for storage. Note 1: This film also can be used in your laser printer Note 2: Your wet finger will stick to the coated side.

Note 3: Printing side is the non-smooth side. A4 8"x12" (210x297 mm). Pad Printing Polymer Plate Making Process. Remove cover film slowly and place positive film onto undeveloped plate. Keep the positive film contact with the plate tightly.

Use positive film having optical density of not less than 3.0. Put the plate covered with film on the glass of the UV exposing machine.

Expose plate, through positive film, to UV light having 360 nm wave lengths for 1-2 minutes. Wash-out exposed plate with water, at 15-25 degree for 1-2 minutes.

You can use a sponge roll or very soft brush. If wash out unit is not available, you can wash it out with running tap water. Dry the plate in a hot-air dryer after removing the surface water by sponge roll(or soft brush) at 50-70 degree for 5-10 minutes. Expose the dried plate to UV light again for 15-20 minutes in order to get stability. After post-exposing, the plate will become hard enough to be suitable for printing.

Gloss film as well as matted film can be used. Good contact between film and plate is essential.

Treat films carefully as any kink will be reproduced on the developed plate. Check film and plate without any dust before exposure. Minimize the pressure of doctor blade to enjoy longer durability of plate. It can be used in inkwell system and closed ink cup system. Listing and template services provided by inkFrog.

The item "Manual ink cup pad printer + Polymer plates making package Business start kits" is in sale since Friday, July 9, 2021. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Pad Printing". The seller is "mysavings" and is located in Piscataway, New Jersey. This item can be shipped to United States, Mexico, Germany, Japan, United Kingdom, France, Australia, Canada.

UPC: Does Not Apply
MPN: Does Not Apply
Brand: Unbranded